Differences

This shows you the differences between two versions of the page.

--- other:dsx:plandsx:motion_capture_cameras [2024/07/17 15:43] – removed sgranger
+++ other:dsx:plandsx:motion_capture_cameras [2025/01/10 21:30] (current) – Cleaned up page. wikisysop
@@ Line 1: / Line 1: @@
+===== Motion Capture Cameras =====
+PlanDSX accounts for the cameras that are a part of the motion-capture system. In the 3D view they are represented by a small box (the camera body) and a semi-transparent cone (the field of view). You can place any number of them in the scene and specify the length and radius of the field of view.
+==== Adding and Removing Cameras ====
+To add a motion capture camera to the scene, press the **Add** button. PlanDSX will add a camera with default parameters pointed at the origin. You can then change its properties using the table and move it in the 3D view. To delete a camera, select it in the table and press the **Remove** button.
+{{:PlanDSX_CamerasWidget.png}}
+==== Camera Properties ====
+^ Property ^ Description ^
+| **Name** | When a new camera is created it is given a default name with the format Camera (1), Camera (2) ... Camera (N). To change this name double-click on it and type in a new name.|
+| **Length** | The length of the cone representing the field of view. To change the length double-click on it and enter a new value.|
+| **Radius** | The radius of the end of the cone representing the field of view. To change the radius double-click on it and enter a new value.|
+| **Visibility** | This checkbox toggles the visibility of the motion capture camera in the 3D view.|
+| **Color** | The colour of the camera body and field of view in the 3D view. To change the colour, double-click on the colour box and select a new colour.|
+==== References ====
+[[other:dsx:plandsx:plandsx_overview|Back to PlanDSX Overview]]