Differences

This shows you the differences between two versions of the page.

--- visual3d:documentation:pipeline:file_commands:downsample_data [2024/07/17 15:42] – removed sgranger
+++ visual3d:documentation:pipeline:file_commands:downsample_data [2024/11/20 20:28] (current) – Cleaned up and working towards Pipeline Command template. Added internal links. wikisysop
@@ Line 1: / Line 1: @@
+===== Downsample Data =====
+This command downsamples all [[visual3d:documentation:c3d_signal_types:target_data_type|TARGET]] signals or all [[visual3d:documentation:c3d_signal_types:analog_data_type|ANALOG]] signals in a [[visual3d:documentation:c3d_signal_types:c3d_format|C3D file]] by an integer multiple. **Note: This is a hidden and unsupported command**
+If you are modifying the ANALOG rate then it will be necessary to ensure that the resulting ANALOG rate is an integer multiple of the TARGET rate.
+==== Pipeline Command ====
+<code>
+Downsample_Data
+/OLD_FILE_NAME=
+/SIGNAL_TYPES=
+/NEW_POINT_RATE=
+/NEW_ANALOG_RATE=
+;
+</code>
+==== Example: Downsample TARGET ====
+Given a C3D file with a POINT rate of 50 Hz and an ANALOG rate of 200 Hz , downsample the POINT signals to 25 Hz.
+<code>
+Downsample_Data
+/OLD_FILE_NAME=*test.c3d
+/SIGNAL_TYPES=TARGET
+/NEW_POINT_RATE=25
+/NEW_ANALOG_RATE=
+;
+</code>
+==== Example: Downsample ANALOG ====
+Given a C3D file with a POINT rate of 50 Hz and an ANALOG rate of 200 Hz, downsample the ANALOG signals to 100 Hz.
+<code>
+Downsample_Data
+/OLD_FILE_NAME=*test.c3d
+/SIGNAL_TYPES=ANALOG
+/NEW_POINT_RATE=
+/NEW_ANALOG_RATE=100
+;
+</code>
+==== See Also ====
+The pipeline command [[visual3d:documentation:pipeline:file_commands:upsample_point_data_to_analog_rate|Upsample_Point_Data_to_Analog_Rate]] upsamples the point data of a C3D file to match the analog rate using a cubic spline.