HAS-Motion Software Documentation

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Metric From C3D Parameter ======

====Overview====
The metric command **Metric from C3D Parameter** is used to copy the values of a c3d parameter to a metric signal.

====Pipeline Command====

<code>
Metric_From_C3D_Parameter
/METRIC_NAME=
/PARAMETER_GROUP=
/PARAMETER_NAME=
;
</code>

====Command Parameters====

The following table shows the command parameters seen above and their descriptions:

|**METRIC_NAME**|**The name of the result signal**|
|**PARAMETER_GROUP**|**Specify the group that the parameter is in**|
|**PARAMETER_NAME**|**The name of the original parameter**|

===== Example =====

Create a metric value of the C3D point rate.

<code>
Metric_From_C3D_Parameter
/METRIC_NAME=POINT_RATE
/PARAMETER_GROUP=POINT
/PARAMETER_NAME=RATE
;
</code>

==== Result ====

{{:Metric_From_C3D_Parameter_Example.jpg}}